公路护栏打桩机厂家:150 3739 2212(微信同步)
DZJ-490公路护栏打桩机参数
全液压打桩机型号
DZJ-490
液压打桩锤参数
液压锤型号
YC260A
YC230
钎杆直径
75 mm
70 mm
使用重量
260KG
230KG
工作流量
50-90L/min
36-65L/min
工作压力
12-15MPa
80-12MPa
工作频率
7-13Hz/min
10-15Hz/min
冲击能
≥900E(J)
≥700E(J)
冲击力
48000kgf
40000kgf
活塞气室压力
1.3+-0.1
1.2+-0.1
蓄能器压力
管道通径
≥16
≥16
液压钻孔机参数
凿岩硬度
F=6-20
钻孔直径
100-200mm
回转速度
≤105r/min
回转扭矩
980N.M
提升力
15000N
推进方式
液压缸
推进行程
2000mm
钻杆直径长度
76*1500
工作气压
0.7-1.0MPa
耗气量
7-13m3/min
动力部分
柴油机功率(Kw)
42
额定载重量
1200kg
重量
2600kg
爬坡度
25°
轴距
2030mm
轮距
1340mm
离地间隙
250mm
铲车转向角
35°
发动机型号
490
额定功率
42KW
额定转速
2200r/min
轮胎
14/90/16
外形尺寸
4100*1600*2700
1.产品均为我厂直销产品,出厂价格比较低,如果需要含运费、税费、安装调试等,请提前与我沟通落定,避免提货,售后产生麻烦。
2.确认订货付款后,请第一时间把收货地址以及提货人姓名电话写清楚以短信或者微信形式发送给我,以免写错位置和电话给你带来不必要的麻烦,通常发货时间为早上8点-下午5点之前。
3.签收货物:收货时,务必在快递或托运公司工作人员面前开包验货.货物在运输路程中出现丢失或损坏就不要签收应当面与我联系,看是货运公司责任还是我厂问题.若在签收后不能出具证明的情况下提出货物丢失或损坏,由运输造成的损失需要买家自行承担!
Sleeve valve pipe grouting is the sleeve valve type grouting pipe by drilling down into formation, using segmented grouting process, make the slurry under the condition of pressure, more evenly into formation, slurry in stratigraphic section in order to achieve controllable and uniform diffusion.Outside the outer tube set when grouting, grouting pipe will permanently remain in the soil, grouting tube every certain distance set aside pulp, pulp out in mouth added a cut-off valve, grouting, place the belt plugging device grouting tube in the outer tube grouting, grouting for grouting section.In this way, the core of the soil is drilled into the soil, and the shear strength of the root network is formed in the fracture of the soil.